CONTACT INFO:
Unit J 2 Torrens Road
East tamaki
Auckland
New Zealand
Phone: (09) 271 2493
Fax: (09) 271 5327
Email:
info@trilect.co.nz
Untitled document
AT80
Gear motor for sliding gates. Intensive use up to 800 kg, residential use up to 1200 kg.
Maximum reliability thanks to the steel gears in oil bath.
Maximum safety thanks to the mechanical anti-crush clutch system. Drive coupling and transmission are achieved using a rack pinion.
Oil bath gear motor with irreversible reductionunit eliminating the need for additionallocking systems.
Customised key lever emergency unlockingsystem to release the gate in the event of amains power failure and to protect againstunwanted entry.
Anti-crush safety is ensured by an adjustableoil bath clutch which reduces the thrust forceof the gate in case of obstacles.
AT80 can be secured to the ground witheither a pivoting or fixed support. The pivotingsupport enables functioning even whenthe guide on the ground is not perfectly levelledthus preventing mechanical stress.
OPERATOR DIMENSIONS
TECHNICAL DATA
POWER SUPPLY
230 V - 50/60 Hz
ABSORBED POWER
330 W
ABSORBED CURRENT
1.8 A
MAX. THRUST FORCE
1400 N (Z16) - 1120 N (Z20)
LINEAR SPEED
9.5 m/min.(Z16) - 12.0 m/min.(Z20)
OPERATING TEMPERATURE
-20ºC to +70ºC
LUBRICANT QUANTITY
1.25 Lt
MAX. GATE WEIGHT (residential use)
1200 kg
OVERLOAD TEMPERATURE
90º C
HEIGHT OF PINION FROM GROUND
70 mm
WEIGHT
14 kg
MAX. NO. CYCLES
100 cycles/day
LUBRIFICANT TYPE
AprimOil DN 22
PROTECTION CLASS
IP 44
DESCRIPTION
Max. gate width
CODE
AT 80 YZ 16
800 kg intensive use
41120/003
Gear motor with 16 teeth rack and pitch 4 pinion, 230 V - 50 Hz power supply, power 330 W with electro-mechanical limit switch, IF80 fixed installation required
1200 kg residential use
NOTE: each installation needs one fixing kit IF80 or IB80.
DESCRIPTION OF OPTIONAL ACCESSORIES
CODE
PF80 - Foundation plate (pack 4 pieces)
41120/050
IB80 - Pivoting installation
41120/052
IF 80 - Fixed installation
41120/051
Unico 433,92 MHz memory System radio receiver with antenna included
41923/009
TR2 - 433.92 MHz twin-channel transmitter
41903/002
ER2N - Pair of photocells
41811/001
PC12E - Key switch for wall mounting
41830/007
CAL - Aluminium column for the ER4N photocells
41812/050
Straight safety edge 1,5 m
41850/002
Straight safety edge 2,0 m
41850/003
Straight safety edge 3,0 m
41850/004
Aprimatic plastic rack pitch 4 complete with couplings (5 m)
41180/052
ARC - Auto Reverse Card
41127/020
IDEAL INSTALLATION
Qty
CODE
AT 80YZ 16 gear motor
1
41120/003
Pack for IF80 fixed installation
1
41120/051
T2E - Electronic control unit
1
41615/003
ER4N - Pair of photocells
1
41812/001
One TR2 - 433,92 MHz twin-channel transmitter
1
41903/002
Unico 433,92 MHz Memory System radio receiver with antenna included
1
41923/009
ET20N - 230 V flashing light
1
41841/009
Aprimatic galvanized rack pitch 4 complete with couplings (5 m)
1
41180/053
NOTE: for control and safety devices and installation accessories, see section "Electronic devices and installation accessories" in this catalogue (consult the index).
