CONTACT INFO:
Unit J 2 Torrens Road
East tamaki
Auckland
New Zealand
Phone: (09) 271 2493
Fax: (09) 271 5327
Email:
info@trilect.co.nz
Untitled document
ONDA 800 - 801
Gear motor for sliding gates. Condominium use up to 500 kg, residential use up to 800 kg.
Anti-crush safety is ensured by a mechanical clutch on the ONDA 800. On the ONDA 801 anti-crush safety is provided by the electronic control unit with builtin electronic torque control and provision for connecting an auto-reverse card to reverse gate direction in case of obstacles while closing.
Maximum reliability thanks to the steel gears in permanent lubrication. Maximum safety thanks to the electronical torque adjustment function.
The gear motor is irreversible and therefore keeps the gate locked. The use of other lock systems is therefore eliminated.
Manual key release in the event of mains power supply failure.
Z20 Pinion is available for the application that need of faster operations speed.
TECHNICAL DATA
POWER SUPPLY
230 V - 50/60 Hz
ABSORBED POWER
260 W
ABSORBED CURRENT
1.6 A
MAX. THRUST FORCE
1250 N (Z16) 1000 N (Z20)
LINEAR SPEED
1250 N (Z16) 1000 N (Z20)
OPERATING TEMPERATURE
-20ºC to +70ºC
MAX. GATE WEIGHT
800 kg (Z16) 500 kg (Z20)
OVERLOAD TEMPERATURE
90º C
HEIGHT OF PINION FROM GROUND
70 mm
WEIGHT
10 kg
MAX. NO. CYCLES
100 cycles/day
LUBRIFICANT TYPE
AprimGREASE Vc 84
PROTECTION CLASS
IP 44
OPERATOR DIMENSIONS
DESCRIPTION
Max. gate width
CODE
ONDA 800 Z 16 Gear motor with mechanical cluth
500 kg residential use 300 kg condominium use
41127/009
ONDA 801 Z 16 Gear motor with electronic torque control
41127/001
ONDA 801 E Z 16 Gear motor with built in T22E control unit and radio receiver with electronic torque control
41127/003
ONDA 801 E Z 16 SET Gear motor with built in T2E control unit use with electronic torque control
500 kg residential use 300 kg condominium use
41127/007
ONDA 800 E Z 16 SET Gear motor with built-in T2E control unit with mechanical clutch
41127/011
DESCRIPTION OF OPTIONAL ACCESSORIES
CODE
PF 501/801 - Foundation plate (pack of 4 pcs)
41126/051
Unico 433,92 MHz Memory System radio receiver with antenna included
41923/009
TR2 - 433.92 MHz twin-channel transmitter
41903/002
ER4N - Pair of photocells
41812/001
PC12E - Key switch for wall mounting
41830/007
CAL - Aluminium column for the ER4N photocells
41812/050
433,92 MHz antenna
41929/001
Straight safety edge 1,5 m
41850/002
Straight safety edge 2,0 m
41850/003
Straight safety edge 3,0 m
41850/004
SB 500/800 Personalised release key
41126/050
Aprimatic galvanized rack pitch 4 complete with couplings (5 m)
41180/053
ARC - Auto Reverse Card
41127/020
IDEAL INSTALLATION
Qty
CODE
ONDA 801 E Z 16 Gear motor with built-in T2E control unit with electronic torque control
1
41127/007
ER4N - Pair of photocells
1
41812/001
One TR2 - 433,92 MHz twin-channel transmitter
1
41903/002
Unico 433,92 MHz Memory System radio receiver with antenna included
1
41923/009
ET20N - 230 V flashing light
1
41841/009
Aprimatic plastic rack with 5 metre steel core for use of up to a maximum of 500 kg
1
41180/052
NOTE: for control and safety devices and installation accessories, see section “Electronic devices and installation accessories” in this catalogue (consult the index). NOTE: the lower gate wheels must not be too small for the weight of the structure (the minimum diameter of the wheels is 120 mm).
