CONTACT INFO:
Unit J 2 Torrens Road
East tamaki
Auckland
 New Zealand
Phone: (09) 271 2493
Fax: (09) 271 5327
Email: info@trilect.co.nz

 



Untitled document

 

ZT t4

Hydraulic operator for swing gates.
Residential and condominium use.

  • Suitable for residential and condominium use with leaf length up to 3 m. Maximum reliability thanks to the sturdiness of the operator.
  • Versions available:
    ZT 4 SF - without lock for leaf length up to 3 m.
    ZT B - with lock in opening/closing position for leaf length up to 1,8 m.
  • Anti-crush system with very sensitive bypass valves calibrated during installation. This immediately cuts the hydraulic pressure in the event of obstacles to ensure maximum system safety.
  • Front and rear mountings to enable screw assembly also on wood, PVC and aluminium gates.
  • Manual key release located on the upper part of the operator in the event of mains power supply failure.
  • The articulated fork rear flange ensures flexible and sturdy assembly on the pillar.
  • The neoprene power supply cable is specifically suited to mobile applications in outdoor environments.

 

TECHNICAL DATA version B - SF

POWER SUPPLY 230 Vac - 50/60 Hz
ABSORBED POWER 250 W
MAX. THRUST FORCE 3850 N
ROD ENTRY TIME 17 sec.
ROD EXIT TIME 20 sec.
OPERATING TEMPERATURE -20°C to +70°C
MAX. WING WIDTH 3,0 m (SF) - 1,8 m (B)
STANDARD MAX. ROD STROKE 275 mm
NUMBER OF CYCLES 200 cycles/day
KEY RELEASE YES
ANTI-CRUSH SYSTEM YES
OVERLOAD TEMPERATURE 120º C
PROTECTION CLASS IP 55

OPERATOR DIMENSIONS

OPERATOR POSITIONING


DESCRIPTION Max. leaf width CODE
ZT 4 B
Hydraulic operator with lock in opening/closing position, electric lock NOT required
1.8 m 41006/001
ZT 4 SF
Hydraulic operator without lock, electric lock required
3.0 m 41006/003
SET ZT 4 B
Set composed of:
two hydraulic ZT 4 B operators with hydraulic lock in opening/closing position, one T1E electronic control unit
1.8 m 41006/805

DESCRIPTION OF OPTIONAL ACCESSORIES CODE
433,92 MHz radioreceiver Memory System 41923/009
TR2 - 433.92 MHz twin-channel transmitter 41903/002
ER4N - Pair of photocells 41812/001
PC12E - Key switch for wall mounting 41830/007
CAL - Aluminium column for the ER4N photocells 41812/050
433,92 MHz antenna 41929/001
ES3 - Electric lock complete with ground striker plate (for gate leaf longer than 1,8 m up to 3 m) CL series cylinder required 41080/008
CL1 - “DEAD HEAD” single cylinder 41080/005
CL2 - “DEAD HEAD” double cylinder 41080/004

IDEAL INSTALLATION Qty CODE
SET ZT 4 B 1 41006/805
Set composed of:
two hydraulic ZT 4 B operators with hydraulic lock in opening/closing position, one T1E electronic control unit
1  
ER4N - Pair of photocells 1 41812/001
One TR2 - 433,92 MHz twin-channel transmitter 1 41903/002
Unico 433,92 MHz Memory System radio receiver complete with antenna 1 41923/009
ET20N - 230 V flashing light 1 41840/006

NOTE: for control and safety devices and installation accessories, see section “Electronic devices and installation accessories” in this catalogue (consult the index).

 

Please send info about ZT T4
Your Name*
Your Email Address*
Address
Phone No.
Message

Security Check Point

This is a captcha-picture. It is used to prevent mass-access by robots. (see: www.captcha.net)
Please copy the text that you see here into the box.