CONTACT INFO:
Unit J 2 Torrens Road
East tamaki
Auckland
New Zealand
Phone: (09) 271 2493
Fax: (09) 271 5327
Email:
info@trilect.co.nz
Untitled document
ZT 40 RF
Hydraulic operator for swing gates, with flow adjustment (RF). Intensive and continuos use.
Double valve flow adjustment device for regulating gate opening and closing speed. Compensates for the unbalanced loads created by wind and out of plumb installation of very light and medium heavy gates.
The hydraulic slowdown system for gate closure can be adjusted during installation to ensure gradual and silent gate approach and to prevent structural stress.
The emergency release system ensures good burglary protection thanks to a personalised key. The system is protected by the top cover and does not spoil the operator's attractive lines.
The rear flange with articulated aluminium fork permits flexible but sturdy assembly on the pillar.
The front mounting features a uniball type ball joint. A 20 mm screw should be used to adjust any out of plumb installation.
The neoprene power supply cable is specially designed for mobile, outdoor installations.
The anti-crush system with ultra-sensitive bypass valves can be calibrated during installation to limit hydraulic pressure if the gate meets an obstacle, thus ensuring maximum operating safety.
TECHNICAL DATA
ZT 40 4 M
ZT 40 7 M
POWER SUPPLY
230 V - 50/60 Hz
230 V - 50/60 Hz
ABSORBED POWER
250 W
250 W
MAX. THRUST FORCE
5650 N
5650 N
VERSIONS
B - C - SF RF DS
B - C - SF RF DS
FLOW ADJUSTMENT
YES
YES
CLOSING SLOWDOWN
YES
YES
CLOSING AND OPENING SLOWDOWN
SF RF DS
SF RF DS
OPENING TIME*
17 sec.
26 sec.
OPERATING TEMPERATURE
-20°C to +70°C
20°C to +70°C
MAX. LEAF WIDTH
4 m
7 m
ROD STROKE
275 mm
390 mm
WEIGHT
10 kg
11 kg
MAX. CYCLES
1000 cycles/day
800 cycles/day
ANTI-CRUSH SYSTEM
Bypass valves
Bypass valves
PROTECTION CLASS
IP 55
IP 55
OPERATOR DIMENSIONS
OPERATOR POSITIONING
DESCRIPTION
Max. leaf width
CODE
ZT 40 4M C RF With flow adjustment valves Hydraulic operator with lock in closed position
2,0 m
41007/009
ZT 40 4M SF RF DS With flow adjustment valves Hydraulic operator without lock
4,0 m
41007/020
ZT 40 4M B RF With flow adjustment valves Hydraulic operator with lock in open and closed position
2,0 m
41007/016
ZT 40 7M C RF With flow adjustment valves Hydraulic operator with lock in closed position
2,0 m
41007/012
ZT 40 7M SF RF DS With flow adjustment valves Hydraulic operator without lock
7,0 m
41007/022
ZT 40 7M B RF With flow adjustment valves Hydraulic operator with lock in open and closed position
2,0 m
41007/018
All operators are equipped with adjustable hydraulic slowdown on closing and a personalised key release system.
DESCRIPTION OF OPTIONAL ACCESSORIES
CODE
TR2 - 433.92 MHz twin-channel transmitter
41903/002
ER4N - Pair of photocells
41812/001
CAL - Aluminium post for ER4N photocell
41812/050
433,92 MHz antenna
41929/001
Electric lock (for gates with wings longer than 1,8 m): ES3 - Electric lock complete with ground striker plate (for gate leaf longer than 1,8 m up to 3 m) CL series cylinder required
41080/008
CL1 - “DEAD HEAD” single cylinder
41080/005
CL2 - “DEAD HEAD” double cylinder
41080/004
IDEAL INSTALLATION
Qty
CODE
ZT 40 4M B RF hydraulic ZT 40 4M B RF operators with lock in open/closed position, electric lock NOT required (max. wing lenght 2,0 m)
2
41007/016
ER4N - Pair of photocells
1
41812/001
One TR2 433,92 MHz twin-channel transmitter
1
41903/002
Unico 433,92 MHz memory System radio receiver complete with antenna
1
41923/009
PC12E - Key switch for wall mounting
1
41830/007
ET20N - 230 V flashing light
1
41841/009
T1E - Electronic control unit
1
41605/005
NOTE: for control and safety devices and installation accessories, see section “Electronic devices and installation accessories” in this catalogue (consult the index).
